Wednesday, December 9, 2009

How do I check the version of the Microsoft iSCSI Software initiator?

Have you ever been looking to see what version of the Microsoft iSCSI initiator has bene installed on a host? And have you found it?


Check the driver version of the iscsi initiator in the scsi adapters section of the device manager, write down the driver version and check it in the list below to find out which version of initiator has been installed.


iSCSI initiator version Driver Build
1.0 5.2.3790.198
1.01 5.2.3790.205
1.02 5.2.3790.215
1.03 5.2.3790.218
1.04 5.2.3790.243
1.04a 5.2.3790.244
1.05 5.2.3790.277
1.05a 5.2.3790.279
1.06 5.2.3790.302
2.0 5.2.3790.1653
2.01 5.2.3790.1748
2.02 5.2.3790.1895
2.03 5.2.3790.3099
2.04 5.2.3790.3273
2.05 5.2.3790.3392

3 comments:

  1. What driver goes with iSCSI 2.08?
    Thanks for the help.

    ReplyDelete
  2. This is a good blog post, thought I would update it with the latest driver versions

    1.0x
    If you see 5.2.3790.198, you are using version 1.00.
    If you see 5.2.3790.205, you are using version 1.01.
    If you see 5.2.3790.215, you are using version 1.02.
    If you see 5.2.3790.218, you are using version 1.03.
    If you see 5.2.3790.244, you are using version 1.04.
    If you see 5.2.3790.279, you are using version 1.05.
    If you see 5.2.3790.302, you are using version 1.06.

    2.0x
    If you see 5.2.3790.1653, you are using version 2.00
    If you see 5.2.3790.1748, you are using version 2.01
    If you see 5.2.3790.1895, you are using version 2.02
    If you see 5.2.3790.3099, you are using version 2.03
    If you see 5.2.3790.3273, you are using version 2.04
    If you see 5.2.3790.3392, you are using version 2.05
    If you see 5.2.3790.3497, you are using version 2.06
    If you see 5.2.3790.3640, you are using version 2.07
    If you see 5.2.3790.3825, you are using version 2.08

    ReplyDelete